How To Adjust Garage Door Cables

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Fort Worth’s best garage door company!

    Phone ☎️ (817) 857-8613

    Or, message us…

    One vital garage door component you should regularly keep in check is the cables.

    Garage door cables work in concert with the springs to raise and lower your door as smoothly and efficiently as possible.

    Apart from this, the cables will prevent the spring from causing any injury in case the latter snaps.

    Given the importance of cables, you should always examine this part of your garage door.

    Make sure that it is intact, tight, and in good shape to avoid accidents and achieve optimum garage door performance.

    For the best garage door repair in Fort Worth, call Panther Garage Pros.

    Our technicians can replace damaged garage door springs, cables, and openers and repair damaged parts.

    Book your appointment with us now!

    Can You DIY Garage Door Cable Adjustment?

    Adjusting your garage door cables can be extremely dangerous if you aren’t knowledgeable and experienced.

    You could be in a major safety hazard if you engage in the task without proper training and preparation.

    Hence, it’s not ideal that you fix your garage door cables on your own.

    Ideally, you should have a professional technician to assist you.

    Or better yet, you should just hire a garage door specialist to address your loose cable problems.

    Experienced garage door technicians are trained to perform garage door repair services safely and efficiently.

    Thus, you can be sure that you have the best people to correctly do the job.

    Besides this, you’ll also feel safe and rested since you won’t have to do anything at all.

    How to Tighten Loose Garage Door Cables

    Like any other garage door part, garage door cables require regular maintenance.

    Due to repeated use, the cables can wear out, snap, and become loose.

    In the event that your cables go out of shape, here’s how to adjust garage door cables:

    1. Put your garage door in a completely closed position.
    2. Disconnect the garage door opener by pulling down the emergency release cord.
    3. Since the garage door is closed, you should notice that the tension springs are tensed or stretched.

    Thus, you’ll have to release this tension by lifting your garage door manually to open it.

    1. Unplug the garage door opener from the power source to prevent accidents.
    2. Secure the garage door with C-clamps so that your door won’t crash down as you work.

    Clamp this tool underneath the bottom rollers.

    1. Locate the cable wiring that you need to disconnect.

    On the top frame of your garage door, you should see a garage door cable.

    This cable is wound around the rollers on one end and connected to a hook on the other.

    1. After that, you should also find a holed frame.

    You need to detach the cable and attach it to another hole to tighten it.

    1. Adjust the cable bracket.

    Using a pair of pliers, loosen the bracket securing the wire to the hook, which connects to the garage door frame.

    Be careful not to loosen the shaft to avoid having unwound or tangled cables.

    1. Pull the cable through the bracket to increase its tension.

    Make sure to tighten just enough so as not to experience any issues with your cables.

    1. Finally, connect the cable back to the frame through the hook.
    2. Reconnect the garage door opener and test your garage door.

    Garage Door Cable Replacement

    If your garage door cable problem involves snapped or damaged cables, then it’s not a cable adjustment that you need.

    Rather, you have no other choice but to replace your garage door cable.

    This is a much riskier and strenuous job than cable adjustment.

    In case your cables suddenly snap, don’t delay and call your trusted local garage door technicians.

    Putting off garage door cable replacement can result in serious damages such as broken springs.

    In the meantime, don’t try to use your garage door and wait until the technicians finish fixing the problem.

    Reliable Garage Door Repair in Fort Worth

    Whether it’s your garage door cables, springs, tracks, or opener that requires fixing, Panther Garage Pros is at your service.

    We offer an extensive range of residential and commercial garage door services throughout Fort Worth.

    If you need an urgent garage door solution, don’t think twice and dial our local number.

    Our technicians will be with you within the hour for a prompt same-day garage door service.

    Rate this post
    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar